Ugrás a tartalomhoz
ÁrBogár
Voltage Blaster Rev. 1.1 −5V ISA Power Adapter for Retro PCs – AssembledVoltage Blaster Rev. 1.1 −5V ISA Power Adapter for Retro PCs – Assembled — 2. képVoltage Blaster Rev. 1.1 −5V ISA Power Adapter for Retro PCs – Assembled — 3. képVoltage Blaster Rev. 1.1 −5V ISA Power Adapter for Retro PCs – Assembled — 4. kép
1 / 4
VintedJó állapotú

Voltage Blaster Rev. 1.1 −5V ISA Power Adapter for Retro PCs – Assembled

4990 Ft

Vevővédelem: 530 Ft· Összesen: 5520 Ft

A
agostontibor81
96MagyarországCsomagküldés
Márka: Voltage BlasterFeladva:

Leírás

Selling a fully assembled Voltage Blaster rev. 1.1 board. The listed price is for one (1) fully assembled board. WHAT IS IT FOR? Older AT power supplies provided a −5V rail, but modern ATX power supplies generally no longer do. Some vintage ISA cards, including the Creative Sound Blaster 2.0 and certain Pro Audio Spectrum sound cards, require −5V to work correctly. The Voltage Blaster restores this missing voltage. It plugs into a spare ISA slot, converts the available −12V into −5V, and supplies it through the motherboard’s ISA bus to the cards that need it. Useful when powering a retro PC with a modern ATX PSU, including an AT motherboard connected through an ATX-to-AT power adapter. FEATURES • Fully assembled — no soldering required • Installs in a spare 8-bit or 16-bit ISA slot • No drivers or external power cable needed • Red LED indicates that −5V is being generated • Revision 1.1 PCB DESIGN AND ORIGIN Based on the open-source Voltage Blaster project by PhilsComputerLab and Necroware. The PCB also credits The Wizard. Original design, circuit diagrams and documentation: https://github.com/necroware/voltage-blaster INSTALLATION Use only with a power supply that does not already provide −5V. The system must supply −12V to the ISA bus. Install with the computer switched off and unplugged. The “PC back” arrow on the board must point towards the rear of the computer.

Hasonló hirdetések

További hirdetések — agostontibor814Összes →